Read-Only - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

read-only

To configure the read-only attribute in a zone attribute group, use the read-only command in zone

attribute configuration submode. To revert to the default, use the no form of the command.

Syntax Description

This command has no other arguments or keywords.

Command Modes

Zone attribute configuration submode.

Command History

Usage Guidelines

This command only configures the read-only attribute for enhanced zoning. To enable broadcast zoning

for basic mode, use the attribute read-only subcommand after entering zone configuration mode using

the zone name command.

The following example shows how to set the read-only attribute for a zone attribute group.

switch# config terminal

switch(config)# zone-attribute-group name admin-attributes vsan 10

switch(config-attribute-group)# read-only

Related Commands

show zone-attribute-group

zone mode enhanced vsan

zone-attribute-group name

OL-18089-01, Cisco MDS NX-OS Release 4.x

no read-only

Modification

This command was introduced.

Displays zone attribute group information.

Enables enhanced zoning for a VSAN.

Configures zone attributes.

Configures zone attribute groups.

Cisco MDS 9000 Family Command Reference