Table of Contents
Advertisement
Chapter
Display the Port Counters
This command is useful to see Egress Received cells (from T3) for this particular port and ingress
transmitted cells to group of T1s and vice versa.
This command is useful to see cells Rx. from dsx3 and cells Tx to dsx3. The last unknown vpi_vci from
dsx3, if there is one, is also reported.
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
dspportcnt "AIM_GRP NO"
dspdsx3portcnt "1"
Configuring the Clock Source
Cisco MGX 8220 Installation and Configuration
5-23
Advertisement
Table of Contents
Troubleshooting
