Table of Contents
Advertisement
Chapter
Procedure for All Errors
The first action to take for all failures seen on an MGX 8220 is to collect data from the following
commands:
Column Slot indicates shelf. slot.
Column CardState indicates the status of the card in the card in that slot.
•
•
•
•
•
•
Column CardType indicates the type of card that is installed in that slot.
Column CardAlarm indicates if any major or minor alarms exist for that slot.
Column Redundancy indicates if the redundancy state has changed.
The output from the dspcds command is a two screen display—First screen displays the card status and
the second screen displays the backplane and node information.
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
dspcds
Slot
CardState
----
-----------
1.1
Unknown
1.2
Active
1.3
Empty
1.4
Active
1.5
Active
1.6
Active
1.7
Active
1.8
Active
1.9
Empty
1.10
Empty
1.11
Empty
1.12
Active
1.13
Empty
1.14
Empty
1.15
Unknown
1.16
Empty
Active indicates when a card has become active.
Empty indicates that the active ASC does not recognize that a card is installed in that slot.
Standby indicates that a card is in standby.
Mismatch indicates that there is some condition that does not allow the active ASC to complete the
initialization of the card in the slot.
Failed indicates that the card has failed the initialization and configuration.
Unknown indicates that the active ASC was not able to identify the card installed in the slot.
NodeName:
Date:
Time:
TimeZone:
TimeZoneGMTOff:
StatsMasterIpAddress: 0.0.0.0
shelfIntegratedAlarm: Minor
BkplnSerialNum:
BkplnType:
BkplnFabNumber:
BkplnHwRev:
Syntax : dspcds
CardType
CardAlarm
--------
---------
?
BNM-T3
Minor
ASC
FRSM-4E1
FRSM-4E1
Major
FRSM-4T1
AUSM-4T1
FRSM-HS1
axis_sh1
01/15/1998
14:14:40
PST
-8
135797
1
218412-00
bb
Cisco MGX 8220 Installation and Configuration
Procedure for All Errors
Redundancy
--------------------
8-3
Advertisement
Table of Contents
Troubleshooting
