Table of Contents
Advertisement
AUSM Specification (4 Port)
Output Jitter Generation:
Physical Layer Alarms:
Physical Layer Performance
Stats:
ATM Interface
Channel Configuration:
VPI/VCI:
Traffic Classes:
UPC Parameters:
Congestion Control Support:
ForeSight Parameters:
Virtual Circuits
Counters:
•
Cisco MGX 8220 Installation and Configuration
B-28
Per Port:
As specified in ITU G.823 for 2.048 mbps
LOS, OOF, AIS, RAI
LCV, LES, LSES, CV, ES, SES, SEFS, AISS, UAS
ATM UNI v3.1, ITU-T G.804, per CCITT I.361
256 per card. Can be allocated across any of the T1 (E1) ports
VPI: 0–255
VCI: 0–4096
CBR, VBR, VBR+
PCR, SCR (VBR), CCDV (CBR)
ForeSight (toward Network for VBR+)
MIR, PIR, Rate Up, Rate Down, QIR, QIR Timeout, IBS
Number of cells received from the interface
Number of cells received with unknown VPI/VCI
Last known VPI/VCI received from the port
Number of cells discarded due to error in cell header
Number of cells received with nonzero GRC field
Number of cells transmitted to the interface
Number of cells transmitted for which EFCI was set
Number of egress cells discarded due to service interface
physical alarm
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Appendix B
Specifications
Advertisement
Table of Contents
Troubleshooting
