Configuring Snmp - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
System Management
Configuring SNMP
STEP 5
Configuring SNMP
STEP 1
STEP 2
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click Save to save your settings.
Simple Network Management Protocol (SNMP) is a network protocol used over
User Datagram Protocol (UDP) that lets you monitor and manage the RV315W
from a SNMP manager. SNMP provides a remote means to monitor and control the
network devices, and to manage the configuration, statistics collection,
performance, and security.
To configure SNMP:
Click System Management > SNMP. The SNMP page opens.
Enter the following information:
•
SNMP: Click Enable to enable SNMP, or click Disable to disable SNMP. By
default, SNMP is disabled.
•
SNMP Version: If you enable SNMP, specify the SNMP version. The
RV315W provides support for network monitoring using SNMP Versions 1,
2c, and 3. By default, SNMP v1&2 is selected.
•
System Contact: Enter the name of the contact person for your RV315W.
•
System Name: Enter the device name for easy identification of your
RV315W.
•
System Location: Enter the physical location of your RV315W.
•
Security Username: Enter the name of the administrator account with the
ability to access and manage the SNMP MIB objects. This is only available
for SNMPv3.
•
Authentication Password: Enter the password of the administrator account
for authentication (the minimum length of password is 8 characters). This is
only available for SNMPv3.
•
Authentication Method: Select either None or CBC-DES as the
authentication method.
•
Encrypted Password: Enter the password for data encryption (the minimum
length of password is 8 characters). This is only available for SNMPv3.
9
98
Advertisement
Table of Contents
