Configuring Inter-Vlan Routing; Configuring Static Routing - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
Networking
Configuring Routing
STEP 3
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
•
If your ISP assigns an IP address for each computer that you use, click
Router to enable the Router mode.
•
If you are sharing IP addresses across several devices such as your LAN,
and are using other dedicated devices for the DMZ, click Gateway to enable
the Gateway mode.
Click Save to save your settings.
Configuring Inter-VLAN Routing
To configure inter-VLAN routing:
Click Networking > Routing > Basic Routing. The Basic Routing page opens.
In the Inter-VLAN Routing area, click Enable to enable inter-VLAN routing.
Click Save to save your settings.
Configuring Static Routing
To configure static routes, specify the IP address and related information for the
destination.
Click Networking > Routing > Basic Routing. The Basic Routing page opens.
In the Static Routes area, click Add to add a new static route.
Enter the following information:
•
Destination Address: Enter the IP address for the host or for the network
that the route leads to.
•
Subnet Mask: Enter the subnet mask of the destination network.
•
Next Hop: Enter the IP address of the gateway through which the destination
host or network can be reached.
Click Save to save your settings.
5
63
Advertisement
Table of Contents
