Configuring Hardware Dmz; Configuring Upnp - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
Networking
Configuring UPnP
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Configuring UPnP
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Configuring Hardware DMZ
To configure the hardware DMZ:
Click Networking > DMZ > Hardware DMZ. The Hardware DMZ page opens.
In the Hardware DMZ area, click Enable to enable the hardware DMZ feature and
set the LAN8 part on the back panel to a DMZ port.
Click Save to save your settings.
If you enable the hardware DMZ feature, click Add to create a hardware DMZ rule.
Enter the following information:
•
Status: Click Enable to enable this DMZ rule, or click Disable to disable this
DMZ rule.
•
Public IP: Enter the public IP address.
•
WAN Port: Choose a WAN interface for this DMZ rule.
Click Save to save your settings.
Universal Plug and Play (UPnP) allows for automatic discovery of devices that can
communicate with your RV315W.
To enable or disable UPnP on the RV315W:
Click Networking > UPnP. The UPnP page opens.
Click Enable to enable UPnP, or click Disable to disable UPnP. If UPnP is disabled,
the RV315W will not allow for automatic device configuration.
Click Save to save your settings.
5
61
Advertisement
Table of Contents
