Getting Started
Mounting the RV315W
NOTE
Mounting the RV315W
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Press and hold the RESET button for more than 5 seconds with a paper clip or a
pencil tip to reboot the unit and restore the factory defaults. Changes that you have
previously made to the RV315W settings are lost.
You can place your RV315W on a desktop or mount it on a wall.
Placement Tips
•
Ambient Temperature—To prevent the RV315W from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
•
Air Flow—Be sure that there is adequate air flow around the RV315W.
•
Mechanical Loading—Be sure that the RV315W is level and stable to avoid
any hazardous conditions.
Place the RV315W horizontally on a flat surface so that it sits on its four rubber
feet.
Wall-Mounting
The RV315W can be wall-mounted. The wall-mounting hardware is
user-supplied. The ports on the back panel must face either upward or downward
when mounting the RV315W to the wall.
The recommended dimensions for the mount kit are as follows:
2
1 8 mm/0.31 in
1
3
4
2 25 mm/0.98 in
3 6.5 mm/0.26 in
1
4 17.9 mm/0.7 in
10