Configuring 3G Wireless Connection - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
Port Management
Configuring 3G Wireless Connection
STEP 6
Configuring 3G Wireless Connection
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Security Mode
WPA2-Enterprise
Click Save to save your settings.
To connect the RV315W to a 3G wireless network, you should first insert an
applicable 3G USB dongle into the 3G interface on the back panel of the RV315W
and then configure the 3G wireless network settings on the RV315W.
To obtain the list of 3G USB dongle models supported by the RV315W, see
www.cisco.com/go/rv315w.
Configuration
WPA2-Enterprise uses WPA2 with RADIUS authentication.
This mode always uses AES encryption mechanism for
data encryption and requires the use of a RADIUS server
to authenticate users.
If you choose this option, enter the following information:
•
WPA Key Renewal Timeout: Enter a value to set
the interval at which the key is refreshed for clients
associated to this SSID. A value of zero (0) indicates
that the key is not refreshed. The default value is
3600 seconds.
•
Encryption Algorithm: Choose either AES or
TKIP+AES as the encryption algorithm for data
encryption. The default is AES.
•
RADIUS Server IP Address: Enter the IP address
of the RADIUS server.
•
RADIUS Server Port: Enter the port number of the
primary RADIUS server. The default value is 1812.
•
RADIUS Server Key: Enter the key for
authentication used by the RADIUS server and the
RV315W.
•
Show Password: Check to show the key in
plaintext.
4
53
Advertisement
Table of Contents
