Configuring Wan1/Lan0 Interface; Configuring Lan - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
Port Management
Configuring LAN
STEP 8
STEP 1
STEP 2
STEP 3
!
CAUTION
Configuring LAN
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click Save to save your settings.
Configuring WAN1/LAN0 Interface
The WAN1/LAN0 interface on the back panel of the RV315W can be configured to
a secondary WAN interface (WAN1) or an additional LAN interface (LAN0).
To set the port type of the WAN1/LAN0 interface:
Click Port Settings > WAN > WAN1/LAN0. The WAN1/LAN0 page opens.
Click LAN0 to set this port to an additional LAN port, or click WAN1 to set this port
to a secondary WAN port.
Click Save to save your settings.
Changing the port type of the WAN1/LAN0 interface requires the RV315W to be
rebooted. Note that changing the port type from WAN1 to LAN0 will reboot the
RV315W with the factory default settings. The previous settings that you made on
the RV315W will be lost.
A virtual LAN (VLAN) is a group of endpoints in a network that are associated by
function or other shared characteristics. Unlike LANs, which are usually
geographically based, VLANs can group endpoints without regard to the physical
location of the equipment or users.
The VLANs allow you to segregate the network into LANs that are isolated from
one another. Any PC that is connected to the specified LAN port is on a separate
VLAN and cannot access other VLANs.
4
43
Advertisement
Table of Contents
