Configuring Default Lan Settings - Cisco Small Business RV315W Administration Manual
Broadband wireless vpn router
Hide thumbs
Also See for Small Business RV315W:
- Datasheet (9 pages) ,
- Quick start manual (13 pages) ,
- Administration manual (102 pages)
Table of Contents
Advertisement
Using the Setup Wizard
Configuring Default LAN Settings
STEP 5
STEP 6
STEP 7
Configuring Default LAN Settings
STEP 8
Cisco RV315W Broadband Wireless VPN Router Administration Guide
In the Enable VLAN area, click Enable when the ISP uses the VLAN ID to add the
tag to the users, and enter the following information:
•
VLAN ID: Enter the tag of the VLAN ID.
•
802.1p Priority: Enter the value of the 802. 1 p priority.
In the MTU area, choose Auto to use the default MTU size or choose Manual if you
want to specify another size. If you choose Manual, enter the custom MTU size in
bytes.
If you want to continue, click Next to proceed to the LAN Configuration page. If you
want to return to the previous page, click Back. If you want to exit the Setup
Wizard, click Exit.
From the LAN Configuration page you can configure the default LAN settings of
the RV315W.
Enter the following information:
•
VLAN: Select a VLAN from the drop-down menu. See
Settings
for more information on configuring the VLANs.
•
IP Address: Enter the subnet IP address of the default LAN.
•
Subnet Mask: Enter the subnet mask of the default LAN.
•
DHCP Server: Click Enable to allow the RV315W to act as a DHCP server
and assign IP addresses to all devices that are connected to the LANs. Any
new DHCP client joining the LANs is assigned an IP address of the DHCP
pool. Click Disable to disable the DHCP server on the RV315W.
•
Start IP: Enter the starting IP address of the DHCP pool if you enable the
DHCP server.
•
End IP: Enter the ending IP address of the DHCP pool if you enable the DHCP
server.
•
Lease Time: Enter the maximum connection time in minutes that a dynamic
IP address is "leased" to a network user. When the time elapses, the dynamic
IP address of the user is automatically renewed. The default is 0, indicates
that the lease time is 1 day.
2
Configuring VLAN
22
Advertisement
Table of Contents
