Shutdown Vlan - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

shutdown vlan

Use the shutdown vlan global configuration command on the switch stack or on a standalone switch to

shut down (suspend) local traffic on the specified VLAN. Use the no form of this command to restart

local traffic on the VLAN.

Syntax Description

No default is defined.

Command Modes

Global configuration

Command History

Usage Guidelines

The shutdown vlan command does not change the VLAN information in the VTP database. The

command shuts down local traffic, but the switch still advertises VTP information.

This example shows how to shut down traffic on VLAN 2:

Switch(config)# shutdown vlan 2

You can verify your setting by entering the show vlan privileged EXEC command.

Related Commands

(config-vlan mode)

Catalyst 3750-X and 3560-X Switch Command Reference

shutdown vlan vlan-id

no shutdown vlan vlan-id

ID of the VLAN to be locally shut down. The range is 2 to 1001. VLANs defined as

default VLANs under the VLAN Trunking Protocol (VTP), as well as

extended-range VLANs (greater than 1005) cannot be shut down. The default

VLANs are 1 and 1002 to 1005.

Modification

This command was introduced.

Shuts down local traffic on the VLAN when in config-VLAN mode (accessed

by the vlan vlan-id global configuration command).

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

Catalyst 3560-x