Table of Contents
Advertisement
Configuring Octel/Meridian 1 Integration Settings
Step 4
Step 5
Setting Companding Law on DPA 7610
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
6-8
Choose one of the following:
•
Never disable—Never disable the ports
•
Disable when CM down—Disables a DPA 7630/7610 Octel port when the
connection to the corresponding DPA 7630/7610 port on Cisco CallManager
is lost
Disable when PBX down—Disables a DPA 7630/7610 Octel port only when
•
the corresponding PBX port is down. In simple mode, this command has no
effect. In hybrid mode, the Octel port will be disabled when the DPA notices
the corresponding PBX port is down. For example, if port 24 goes down, port
16 will be disabled. In this case, ports 1-8 are never be disabled.
•
Disable when either down—Disables a DPA 7630/7610 Octel port when
either the connection to the PBX or to Cisco CallManager is lost.
•
Disable when both down—Disables a DPA 7630/7610 Octel port when both
the Cisco CallManager connection is lost and the PBX connection is lost.
Restart the DPA 7630.
You must configure the encoding algorithm, A-law or mu-law, used by the
Meridian 1 and Octel systems. The settings on the DPA 7610 must match the
settings on the Meridian 1 and Octel systems. Typically, North American systems
use mu-law, and European systems use a-law.
To set the companding law, perform these steps:
From the main menu, choose Configure.
Choose Octel/Meridian 1 integration.
Choose Companding law.
Choose the appropriate option corresponding to the setting on the Octel system.
Restart the DPA 7610.
Chapter 6
Configuring Telephony Settings
78-11069-03
Advertisement
Chapters
Table of Contents
Troubleshooting
