IBM x3250 M3 Problem Determination And Service Manual page 132
Hide thumbs
Also See for x3250 M3:
- Installation and user manual (102 pages) ,
- Product manual (37 pages) ,
- Manual (32 pages)
Table of Contents
Advertisement
10. From a command line, type filename-s, where filename is the name of the
11. Turn off the server and disconnect all power cords and external cables, and
12. Move the boot block recovery jumper back to the primary position (pins 1 and
13. Reinstall the server cover, and then reconnect all the power cables.
14. Restart the server.
In-band automated boot recovery method
Note: Use this method if the system board error LED is lit and there is a log entry
or Booting Backup Image is displayed on the firmware splash screen; otherwise,
use the in-band manual recovery method.
1. Boot the server to an operating system that is supported by the firmware update
2. Perform the firmware update by following the instructions that are in the
3. Restart the server.
114
IBM System x3250 M3 Types 4251, 4252, and 4261: Problem Determination and Service Guide
4. Move the jumper from pins 1 and 2 to pins 2 and 3 to enable the UEFI
recovery mode.
5. Reinstall the server cover; then, reconnect all power cords.
6. Restart the server. The power-on self-test (POST) starts.
7. Boot the server to an operating system that is supported by the firmware
update package that you downloaded.
8. Perform the firmware update by following the instructions that are in the
firmware update package readme file.
9. Copy the downloaded firmware update package into a directory.
executable file that you downloaded with the firmware update package.
then remove the server cover.
2).
package that you downloaded.
firmware update package readme file.
Hide quick links:
Advertisement
Table of Contents
