Clear Ipv6 First Hop Security Counters - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
25
487
User Guidelines
When a policy containing this command is attached to a VLAN, it overrides the
global configuration and is applied to all ports of the VLAN. When this command is
used in a policy attached to a port, it overrides the global and the VLAN
configurations.
Example
The following example shows how to define policy1 that changes the global
bound address verification in Neighbor Binding:
switchxxxxxx(config)#
switchxxxxxx(config-nbr-binding)#
switchxxxxxx(config-nbr-binding)#
25.3 clear ipv6 first hop security counters
To clear IPv6 First Hop Security port counters, use the clear ipv6 first hop security
counters command in privileged EXEC mode.
Syntax
clear ipv6 first hop security counters [interface
Parameters
•
interface-id
interface
specified Ethernet port or port channel.
Command Mode
Privileged EXEC mode
User Guidelines
This command clears port counters about packets handled by IPv6 First Hop
Security.
Use the interface keyword to clear all counters for the specific port.
Use the command without keyword to clear all counters.
ipv6 neighbor binding policy policy1
address-prefix-validation enable
exit
—Clear IPv6 First Hop Security counters for the
OL-32830-01 Command Line Interface Reference Guide
IPv6 First Hop Security
interface-id
]
Advertisement
Table of Contents
