Ipv6 Nd Inspection Sec-Level Minimum - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

IPv6 First Hop Security

OL-32830-01 Command Line Interface Reference Guide

switchxxxxxx(config-nd-inspection)# exit

Example 3. The following example removes an attached ND Inspection policy:

switchxxxxxx(config)#

Policy policy1 is applied on the following ports:

The policy1 will be detached and removed, are you sure [Y/N]Y

25.28 ipv6 nd inspection sec-level minimum

To globally specify the minimum security level value, use the ipv6 nd inspection

sec-level minimum command in Global Configuration mode. To return to the

default, use the no form of this command.

ipv6 nd inspection sec-level minimum

no ipv6 nd inspection sec-level minimum

—Sets the minimum security level. Range: 0–7.

Default Configuration

All messages are bridged.

Command Mode

Global Configuration mode

User Guidelines

This command specifies the minimum security level parameter value when the

drop-unsecured feature is configured.

This command has no effect if dropping of non secure messages is disabled.

no ipv6 nd inspection policy policy1