Cisco Catalyst 2960 Command Reference Manual page 395
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
In the preceding display, Status is defined as follows:
•
•
•
This is an example of output from the show mvr interface command for a specified port:
Switch# show mvr interface gigabitethernet0/2
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface gigabitethernet0/2 members
239.255.0.0
239.255.0.1
239.255.0.2
239.255.0.3
239.255.0.4
239.255.0.5
239.255.0.6
239.255.0.7
239.255.0.8
239.255.0.9
Related Commands
Command
mvr (global configuration)
mvr (interface configuration)
show mvr
show mvr members
78-16882-01
Active means the port is part of a VLAN.
Up/Down means that the port is forwarding/nonforwarding.
Inactive means that the port is not yet part of any VLAN.
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
DYNAMIC ACTIVE
Description
Enables and configures multicast VLAN registration on the
switch.
Configures MVR ports.
Displays the global MVR configuration on the switch.
Displays all receiver ports that are members of an MVR
multicast group.
Catalyst 2960 Switch Command Reference
show mvr interface
2-367
Hide quick links:
Advertisement
Table of Contents
