Cisco Catalyst 2960 Command Reference Manual page 354
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
show lacp
This is an example of output from the show lacp neighbor command:
Switch> show lacp neighbor
Flags:
Channel group 3 neighbors
Partner's information:
Port
Gi0/1
Partner's information:
Port
Gi0/2
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two
bytes are the system priority, and the last six bytes are the globally administered individual MAC address
associated to the system.
Related Commands
Command
clear lacp
lacp port-priority
lacp system-priority
Catalyst 2960 Switch Command Reference
2-326
S - Device is sending Slow LACPDUs F - Device is sending Fast LACPDUs
A - Device is in Active mode
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner
System ID
32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Description
Clears the LACP channel-group information.
Configures the LACP port priority.
Configures the LACP system priority.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
P - Device is in Passive mode
Partner
Port Number
Age
0xC
19s
Partner
Partner
Oper Key
Port State
0x3
0x3C
Partner
Port Number
Age
0xD
15s
Partner
Partner
Oper Key
Port State
0x3
0x3C
Partner
Flags
SP
Partner
Flags
SP
78-16882-01
Hide quick links:
Advertisement
Table of Contents
