Cisco Catalyst 2960 Command Reference Manual page 515
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Examples
This example sets the aging time as 2 hours for absolute aging for all the secure addresses on the port:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# switchport port-security aging time 120
This example sets the aging time as 2 minutes for inactivity aging type with aging enabled for configured
secure addresses on the port:
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# switchport port-security aging time 2
Switch(config-if)# switchport port-security aging type inactivity
Switch(config-if)# switchport port-security aging static
This example shows how to disable aging for configured secure addresses:
Switch(config)# interface gigabitethernet0/2
Switch(config-if)# no switchport port-security aging static
Related Commands
Command
show port-security
switchport port-security
78-16882-01
Description
Displays the port security settings defined for the port.
Enables port security on a port, restricts the use of the port to a
user-defined group of stations, and configures secure MAC addresses.
switchport port-security aging
Catalyst 2960 Switch Command Reference
2-487
Hide quick links:
Advertisement
Table of Contents
