Debug Ip Dhcp Snooping - Cisco Catalyst 2960 Command Reference Manual
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
debug ip dhcp snooping
debug ip dhcp snooping
Use the debug ip dhcp snooping privileged EXEC command to enable debugging of DHCP snooping.
Use the no form of this command to disable debugging.
mac-address
Syntax Description
agent
event
packet
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)FX
Usage Guidelines
The undebug ip dhcp snooping command is the same as the no debug ip dhcp snooping command.
Related Commands
Command
show debugging
Catalyst 2960 Switch Command Reference
B-10
debug ip dhcp snooping {mac-address | agent | event | packet}
Display debug messages for a DHCP packet with the specified MAC address.
Display debug messages for DHCP snooping agents.
Display debug messages for DHCP snooping events.
Display debug messages for DHCP snooping.
Modification
This command was introduced.
Appendix B
Description
Displays information about the types of debugging that are
enabled. For syntax information, select Cisco IOS Release 12.2
Configuration Guides and Command References > Cisco IOS
Configuration Fundamentals Configuration Guide,
Release 12.2 > System Management > Troubleshooting and
Fault Management.
Catalyst 2960 Switch Debug Commands
78-16882-01
Hide quick links:
Advertisement
Table of Contents
