Show San-Ext-Tuner - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show san-ext-tuner
To display SAN extension tuner information, use the show san-ext-tuner command.
Syntax Description
interface
gigabitethernet
slot/port
nport
pwwn pwwn-id
vsan vsan-id
counters
nports
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
2.0(x)
Usage Guidelines
None.
Examples
The following example shows how to display SAN extension tuner N port information.
switch# show san-ext-tuner nports
Related Commands
Command
san-ext-tuner
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show san-ext-tuner {interface gigabitethernet slot/port [nport pwwn pwwn-id vsan vsan-id
counters] | nports}
Displays SAN extension tuner information for a specific Gigabit Ethernet
interface.
Specifies a Gigabit Ethernet interface.
Specifies an N port.
Specifies a pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is
a hexadecimal number.
Specifies a VSAN ID. The range is 1 to 4093.
Specifies SAN extension tuner counters.
Displays SAN extension tuner information for all nports.
Modification
This command was introduced.
Description
Enters SAN extension tuner configuration mode.
Cisco MDS 9000 Family Command Reference
show san-ext-tuner
22-287
Advertisement
Table of Contents
