Show Fcip - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
show fcip
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6
7
The following example displays information for a specified FCIP profile.
switch# show fcip profile 7
FCIP Profile 7
The following example displays FCIP summary information.
switch# show fcip summary
sw172-22-46-223# show fcip summary
-------------------------------------------------------------------------------
Tun prof
-------------------------------------------------------------------------------
1
2
Table 22-4
Table 22-4
Field
Tun
prof
Eth-if
peer-ip
Status
TE
WA
TA
Enc
Bandwidth max/min
rtt (us)
Related Commands
Command
fcip enable
Cisco MDS 9000 Family Command Reference
22-84
46.1.1.2
47.1.1.2
Internet Address is 47.1.1.2 (interface GigabitEthernet4/7)
Listen Port is 3225
TCP parameters
SACK is disabled
PMTU discovery is enabled, reset timeout is 3600 sec
Keep alive is 60 sec
Minimum retransmission timeout is 300 ms
Maximum number of re-transmissions is 4
Send buffer size is 0 KB
Maximum allowed bandwidth is 1000000 kbps
Minimum available bandwidth is 15000 kbps
Estimated round trip time is 1000 usec
Eth-if
peer-ip
1
GE1/1
10.10.11.2
2
GE1/2
10.10.60.2
describes the significant fields shown in the previous display.
show fcip summary Field Descriptions
Description
Tunnel number for the row. For example, a number 1 indicates tunnel
fcip1 and a number 2 indicates fcip2.
Tunnel profile.
Ethernet interface to which this tunnel is bound.
IP address of the tunnel peer port on the far end of the tunnel.
State of the tunnel (UP or DOWN).
Tunnel operating in TE mode (Yes or No).
Write acceleration enabled (Yes or No).
Tape acceleration enabled (Yes or No).
Encryption enabled (Yes or No).
Maximum and minimum bandwidth configured in the profile to which
this tunnel is bound.
Round trip time (RTT) in microseconds.
Description
Configures FCIP parameters.
3225
3225
Status T W T Enc Comp
E A A
DOWN
N N N
N
DOWN
N N N
N
Chapter 22
Show Commands
Bandwidth
rtt
max/min
(us)
N
1000M/500M
1000
N
1000M/500M
1000
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
