Interface Fc - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 11
I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
interface fc
To configure a Fibre Channel interface on the Cisco MDS 9000 Family of switches, use the interface fc
command in EXEC mode. To revert to defaults, use the no form of the command.
Syntax Description
slot/port
channel-group
group-id
force
auto
fcdomain
rcf-reject
vsan vsan-id
fspf
cost link-cost
dead-interval seconds
ficon
portnumber portnumber
hello-interval seconds
passive
retransmit-interval
seconds
Defaults
Disabled.
Command Modes
Configuration mode.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
interface fc slot/port
channel-group {group-id [force] | auto}
fcdomain rcf-reject vsan vsan-id
fspf {cost link-cost vsan vsan-id | ficon portnumber portnumber | dead-interval seconds vsan
vsan-id | hello-interval seconds vsan vsan-id | passive vsan vsan-id | retransmit-interval
seconds vsan vsan-id}
interface fc slot/port
no channel-group {group-id [force] | auto}
no fcdomain rcf-reject vsan vsan-id
no fspf {cost link_cost vsan vsan-id | ficon portnumber portnumber | dead-interval seconds
vsan vsan-id | hello-interval seconds vsan vsan-id | passive vsan vsan-id | retransmit-interval
seconds vsan vsan-id}
Specifies a slot number and port number.
Adds to or removes from a Port Channel.
Specifies a Port Channel group number from 1 to 128.
Forcefully adds a port.
Enables autocreation of port channels.
Enters the interface submode.
Configures the rcf-reject flag.
Specifies the VSAN ID. The range is 1 to 4093.
Configures FSPF parameters.
Configures FSPF link cost. The range is 1 to 65535.
Configures FSPF dead interval in seconds. The range is 2 to 65535.
Configures FICON parameters.
Configures the FICON port number for this interface.
Configures FSPF hello-interval. The range is 1 to 65535.
Enables or disables FSPF on the interface.
Configures FSPF retransmit interface in seconds. The range is 1 to 65535.
Cisco MDS 9000 Family Command Reference
interface fc
11-23
Advertisement
Table of Contents
