Iscsi Dynamic Initiator - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

iscsi dynamic initiator

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

iscsi dynamic initiator

To configure dynamic initiator modes, use the iscsi dynamic initiator command in configuration mode.

To revert to the default mode, use the no form of the command.

Syntax Description

Command Modes

Configuration mode.

Command History

Usage Guidelines

Three dynamic initiator modes are supported:

iSCSI dynamic initiator is the default mode of operation. This configuration is distributed using CFS.

Configuring dynamic initiator modes is supported only through the CLI, not through Device Manager or

Fabric Manager.

A dynamic iSCSI initiator can be converted to a static iSCSI initiator and its WWNs can be made

A dynamic iSLB initiator can be converted to a static iSLB initiator and its WWNs can be made

You cannot convert a dynamic iSCSI initiator to a static iSLB initiator, or a dynamic iSLB initiator to a

static iSCSI initiator.

Cisco MDS 9000 Family Command Reference

iscsi dynamic initiator {deny | islb}

no dynamic initiator {deny | islb}

Specifies that dynamic initiators are denied from logging on to the MDS

Specifies iSLB dynamic initiator mode.

Modification

This command was introduced.

iSCSI—Dynamic initiators are treated as iSCSI initiators and can access dynamic virtual targets and

configured iSCSI virtual targets.

iSLB—Dynamic initiators are treated as iSLB initiators and can access dynamic virtual targets.

Deny—Dynamic initiators are not allowed to log in to the MDS switch.

OL-8413-07, Cisco MDS SAN-OS Release 3.x