Fspf Hello-Interval - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fspf hello-interval

To verify the health of the link, use the fspf hello-interval command. To revert to the default value, use

the no form of the command.

Syntax Description

hello-interval seconds

vsan vsan-id

Command Modes

Interface configuration submode.

Command History

Usage Guidelines

Access this command from the

This command configures FSPF for the specified FCIP interface.

This value must be the same in the ports at both ends of the ISL.

The following example configures a hello interval of 3 seconds on VSAN 1.

switch# config terminal

switch(config)# interface fcip 1

switch(config-if)# fspf hello-interval 3 vsan 1

Related Commands

show fspf interface

show interface fcip

OL-8413-07, Cisco MDS SAN-OS Release 3.x

fspf hello-interval seconds vsan vsan-id

no fspf hello-interval seconds vsan vsan-id

Modification

This command was introduced.

Displays information for each selected interface.

Displays an interface configuration for a specified FCIP interface.

Specifies the FSPF hello-interval in seconds. The rage is 2 to 65535.

Specifies a VSAN ID. The range is 1 to 4093.

switch(config-if)#

Cisco MDS 9000 Family Command Reference

fspf hello-interval