Ficon Logical-Port Assign Port-Numbers - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

ficon logical-port assign port-numbers

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ficon logical-port assign port-numbers

To reserve FICON port numbers for logical interfaces on the switch, use the ficon logical-port assign

port-numbers command in configuration mode. To release the port numbers, use the no form of the

Syntax Description

port-numbers

Command Modes

Configuration mode.

Command History

Usage Guidelines

You must reserve port numbers for logical interfaces, such as FCIP and PortChannels, if you plan to use

You cannot change or release port numbers for interfaces that are active. You must disable the interfaces

using the shutdown command.

This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class

BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.

The following example reserves port numbers 230 through 249 for FCIP and PortChannel interfaces.

switch(config)# ficon logical-port assign port-numbers 230-249

The following example reserves port numbers 0xe6 through 0xf9 for FCIP and PortChannel interfaces.

switch(config)# ficon logical-port assign port-numbers 0xe6-0xf9

The following example releases the port numbers.

switch(config)# no ficon logical-port assign port-numbers 230-249

Related Commands

Cisco MDS 9000 Family Command Reference

ficon logical-port assign port-numbers [port-numbers]

no ficon logical-port assign port-numbers [port-numbers]

Specifies the range of port numbers to assign. The range can be 0 through

153 or 0x0 through 0x99.

Modification

This command was introduced.

Displays configured FICON details.

OL-8413-07, Cisco MDS SAN-OS Release 3.x