Cisco MDS 9000 series Command Reference Manual page 565

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Usage Guidelines

The install all command upgrades all modules in any Cisco MDS 9000 Family switch.

During a software upgrade to Cisco MDS SAN-OS 3.1(3), all modules that are online are tested and the

installation stops if any modules are running with a faulty CompactFlash. When this occurs, the switch

can not be upgraded until the situation is corrected. A system message displays the module information

and indicates that you must issue the system health cf-crc-check module CLI command to

troubleshoot.

To copy a remote file, specify the entire remote path exactly as it is.

If a switchover is required when you issue the install all command from a Telnet or SSH session, all

open sessions are terminated. If no switchover is required, the session remains unaffected. The software

issues a self-explanatory warning at this point and provides the option to continue or terminate the

installation.

See the Cisco MDS 9000 Family CLI Configuration Guide for detailed procedures.

The following example displays the result of the install all command if the system and kickstart files are

specified locally.

switch# install all sys bootflash:isan-1.3.1 kickstart bootflash:boot-1.3.1

Verifying image bootflash:/boot-1.3.1