Aaa Authentication Dhchap Default - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

aaa authentication dhchap default

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

aaa authentication dhchap default

To configure DHCHAP authentication method, use the aaa authentication dhchap default command

in configuration mode. To revert to factory defaults, use the no form of the command.

Syntax Description

group group-name

Local user name authentication.

Command Modes

Configuration mode.

Command History

Usage Guidelines

The local option disables other authentication methods and configures local authentication to be used

exclusively.

Specify the currently configured command preceded by a no in order to revert to the factory default.

The following example enables all DHCHAP authentication to be performed using remote TACACS+

servers which are member of the group called TacServers, followed by the local authentication.

switch# config terminal

switch(config)# aaa authentication dhchap default group TacServer

The following example reverts to the local authentication method (default).

switch(config)# no aaa authentication dhcahp default group TacServer

Related Commands

show aaa authentication

Cisco MDS 9000 Family Command Reference

aaa authentication dhchap default {group group-name [none] | none} | local [none] | none}}

no aaa authentication dhchap default {group group-name [none] | none} | local [none] | none}

Specifies the group name authentication method. The group name is a

maximum of 127 characters.

Specifies local user name authentication (default).

Specifies no authentication.

Modification

This command was introduced.

Displays the configured authentication methods.

OL-8413-07, Cisco MDS SAN-OS Release 3.x