Islb Zoneset Activate - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
islb zoneset activate
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
islb zoneset activate
To activate iSCSI server load balancing (iSLB) auto zones, use the islb zoneset activate command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
Configuration mode.
Command History
Release
3.0(1)
Usage Guidelines
Auto-zoning of the initiator with the initiator targets is enabled by default.
A zone set must be active for a VSAN for auto-zones to be created in that VSAN. The zoneset activate
command creates auto-zones only if at least one other change has been made to the zone set.
Examples
The following example activates an iSLB auto zone.
switch# config t
switch(config)# islb zoneset activate
Related Commands
Command
show zoneset active
Cisco MDS 9000 Family Command Reference
11-110
islb zoneset activate
Modification
This command was introduced.
Description
Displays active zone sets.
Chapter 11
I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
