Ficon Port Default-State Prohibit-All - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ficon port default-state prohibit-all

To set the FICON port default state to prohibit all, use the ficon port default-state prohibit-all

command in configuration mode. To disable the feature or to revert to factory defaults, use the no form

of the command.

Syntax Description

This command has no arguments or keywords.

Command Modes

Configuration mode.

Command History

Usage Guidelines

You can change the default port prohibiting state to enabled in VSANs that you create and then

selectively disable port prohibiting on implmeneted ports, if desired. Only the FICON configuration files

created after you change the default have the new default setting.

This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class

BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.

The following example enables port prohibiting as the default for all implemented interfaces on the

switch(config)# ficon port default-state prohibit-all

The following example disables port prohibiting as the default for all implemented interfaces on the

switch(config)# no port default-state prohibit-all

Related Commands

show ficon port

default-state

OL-8413-07, Cisco MDS SAN-OS Release 3.x

ficon port default-state prohibit-all

no ficon port default-state prohibit-all

Modification

This command was introduced.

Displays default FICON port prohibit state.

ficon port default-state prohibit-all

Cisco MDS 9000 Family Command Reference