Ivr Service-Group Name - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr service-group name

To configure an Inter-VSAN Routing (IVR) service group, use the ivr service-group name command

in configuration mode. To disable this feature, use the no form of the command.

Syntax Description

service-group

Command Modes

Configuration mode.

Command History

Usage Guidelines

In a complex network topology, you might only have a few IVR-enabled VSANs. To reduce the amount

of traffic to non-IVR-enabled VSANs, you can configure a service group that restricts the traffic to the

IVR-enabled VSANs. A service group is a combination of AFIDs and VSANs. Up to 16 service groups

can be configured. A VSAN or AFID can belong to just one service group. When a new IVR-enabled

switch is added to the network, you must update the service group to include the new VSANs.

There can be a maximum of 128 AFID/VSAN combinations in all service group. However, all 128

combinations can be in one service group.

The default service group ID is 0. The default service group is for all VSANs that are not a part of a

user-defined service group.

Before configuring an IVR service group, you must enable the following:

Using the autonomous-fabric-id (IVR topology database configuration) command, you can restrict

the IVR traffic to the AFIDs and VSANs configured in the service group.

OL-8413-07, Cisco MDS SAN-OS Release 3.x

ivr service-group name service-group

no ivr service-group name service-group

Specifies the service group name.

Modification

This command was introduced.

IVR using the ivr commit command

IVR distribution using the ivr commit command

Automatic IVR topology discovery using the ivr commit auto command.

Cisco MDS 9000 Family Command Reference

ivr service-group name