Show Incompatibility System - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
show incompatibility system
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show incompatibility system
To display the High Availability compatibility status between the current system image on both
supervisors and the new system image to be installed on both supervisors, use the show incompatibility
system command.
Syntax Description
bootflash:
slot0:
volatile:
image-filename
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
1.2(1)
3.0(1)
Usage Guidelines
If the High Availability compatibility is
supervisors.
If the High Availability compatibility is
resources may become unusable when a switchover happens.
Examples
The following examples display kernel core settings.
switch# show incompatibility system bootflash:old-image-y
The following configurations on active are incompatible with the system image
1) Feature Index : 67 , Capability : CAP_FEATURE_SPAN_FC_TUNNEL_CFG
Description : SPAN - Remote SPAN feature using fc-tunnels
Capability requirement : STRICT
2) Feature Index : 119 , Capability : CAP_FEATURE_FC_TUNNEL_CFG
Description : fc-tunnel is enabled
Capability requirement : STRICT
The following example shows commands needed to disable incompatible features.
switch# show incompatibility system bootflash:m9200-ek9-mz.1.3.4b.bin
The following configurations on active are incompatible with the system image
1) Service : cfs , Capability : CAP_FEATURE_CFS_ENABLED_DEVICE_ALIAS
Description : CFS - Distribution is enabled for DEVICE-ALIAS
Capability requirement : STRICT
Disable command : no device-alias distribute
Cisco MDS 9000 Family Command Reference
22-122
show incompatibility system [bootflash: | slot0: | volatile:] image-filename
Source or destination location for internal bootflash memory
Source or destination location for the CompactFlash memory or PCMCIA
card.
Source or destination location for the volatile directory.
Specifies the name of the system image.
Modification
This command was introduced.
Provided an example to show that the command output provides the
commands needed to disable incompatible features.
then the upgrade to that image will be disruptive for both
strict
, the synchronization may happen without errors, but some
loose
Chapter 22
Show Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
