Iscsi Import Target Fc - Cisco MDS 9000 series Command Reference Manual

Hide thumbs Also See for MDS 9000 series:

Table of Contents

iscsi import target fc

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

iscsi import target fc

To allow dynamic mapping of Fibre Channel targets, use the iscsi import target fc command. To disable

this feature, use the no form of the command.

Syntax Description

This command has no arguments or keywords.

Command Modes

Configuration mode.

Command History

Usage Guidelines

This command directs iSCSI to dynamically import all Fibre Channel targets into iSCSI.

This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class

BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.

The following example allows dynamic mapping of Fibre Channel targets.

switch# config terminal

switch(config)# iscsi import target fc

The following example disables dynamic mapping of Fibre Channel targets.

switch(config)# no iscsi import target fc

Related Commands

show iscsi global

Cisco MDS 9000 Family Command Reference

iscsi import target fc

no iscsi import target fc

Modification

This command was introduced.

Displays all iSCSI initiators configured by the user..

OL-8413-07, Cisco MDS SAN-OS Release 3.x