Show Dpvm - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show dpvm
To display dynamic port VSAN membership (DPVM) information, use the show dpvm command.
Syntax Description
database
active
pending
pending-diff
ports
vsan vsan-id
status
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
2.0(x)
Usage Guidelines
To use this command, DPVM must be enabled using the dpvm enable command.
Examples
The following example shows how to display DPVM database information.
switch# show dpvm database
pwwn 00:00:00:00:00:00:00:01 vsan 1
pwwn 00:00:00:00:00:00:00:02 vsan 1
[Total 2 entries]
Related Commands
Command
dpvm database
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show dpvm {database [active] | pending | pending-diff | ports [vsan vsan-id] | status}
Displays both the configured and active DPVM databases.
Displays only the active DPVM database.
Displays pending DPVM operations.
Displays differences between the pending DPVM operations and the active
DPVM database.
Displays DPVM information for the ports.
Specifies a VSAN ID. The range is from 0 to 4093.
Displays DPVM status information.
Modification
This command was introduced.
Description
Configures the DPVM database.
Cisco MDS 9000 Family Command Reference
show dpvm
22-57
Advertisement
Table of Contents
