Radius-Server Host - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 20
R Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
radius-server host
To configure RADIUS server parameters, use the radius-server host command. Use the no form of this
command to revert to the factory defaults.
Syntax Description
server-name
ipv4-address
ipv6-address
auth-port port-number Configures the RADIUS server port for authentication.
acct-port port-number
authentication
accounting
key
0
7
shared-secret
retransmit count
test
idle-time time
password password
username name
timeout seconds
OL-8413-07, Cisco MDS SAN-OS Release 3.x
radius-server host {server-name | ipv4-address | ipv6-address}
[key [0 | 7] shared-secret] [accounting]
[acct-port port-number] [auth-port port-number] [authentication] [retransmit count]
[test {idle-time time | password password | username name}]
[timeout seconds [retransmit count]]
no radius-server host {server-name | ipv4-address | ipv6-address}
[key [0 | 7] shared-secret] [accounting]
[acct-port port-number] [auth-port port-number] [authentication] [retransmit count]
[test {idle-time time | password password | username name}]
[timeout seconds [retransmit count]]
Specifies the RADIUS server DNS name. Maximum length is 256
characters.
Specifies the RADIUS server IP address in the format A.B.C.D.
Specifies the RADIUS server IP address in the format X:X::X.
Configures the RADIUS server port for accounting.
Configures authentication.
Configures accounting.
Configures the RADIUS server shared secret key.
Configures a preshared key specified in clear text (indicated by 0) to
authenticate communication between the RADIUS client and server. This is
the default.
Configures a preshared key specified in encrypted text (indicated by 7) to
authenticate communication between the RADIUS client and server.
Configures a preshared key to authenticate communication between the
RADIUS client and server.
Configures the number of times the switch tries to connect to a RADIUS
server(s) before reverting to local authentication. The range is 1 to five times
and the default is 1 time.
Configures parameters to send test packets to the RADIUS server.
Specifies the time interval (in minutes) for monitoring the server. The time
range is 1 to 1440 minutes.
Specifies a user password in the test packets. The maximum size is 32.
Specifies a user name in the test packets. The maximum size is 32.
Specifies the timeout (in seconds) between retransmissions to the RADIUS
server. The default is 1 second and the valid range is 1 to 60 seconds.
Cisco MDS 9000 Family Command Reference
radius-server host
20-7
Advertisement
Table of Contents
