Nport Pwwn - Cisco MDS 9000 series Command Reference Manual
Hide thumbs
Also See for MDS 9000 series:
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages) ,
- Hardware installation manual (60 pages)
Table of Contents
Advertisement
Chapter 16
N Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
nport pwwn
To configure the nport pWWN for the SAN extension tuner, use the nport pwwn command in SAN
extension configuration mode. To revert to the default value, use the no form of the command.
Syntax Description
pwwn-id
vsan vsan-id
interface gigabitethernet
slot/port
Defaults
None.
Command Modes
SAN extension configuration mode.
Command History
Release
2.0(x)
Usage Guidelines
None.
Examples
The following example shows how to add an entry to the SAN extension tuner database.
switch# san-ext-tuner
switch(san-ext)# nport pwwn 11:22:33:44:55:66:77:88 vsan 1 interface gigabitethernet 1/1
Related Commands
Command
san-ext-tuner
show san-ext-tuner
OL-8413-07, Cisco MDS SAN-OS Release 3.x
nport pwwn pwwn-id vsan vsan-id interface gigabitethernet slot/port
no nport pwwn pwwn-id vsan vsan-id interface gigabitethernet slot/port
Modification
This command was introduced.
Description
Enters SAN extension configuration mode.
Shows SAN extension tuner information.
Specifies the port WWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal number.
Specifies the VSAN ID. The range is 1 to 4093.
Specifies the Gigabit Ethernet interface slot and port.
Cisco MDS 9000 Family Command Reference
nport pwwn
16-7
Advertisement
Table of Contents
