Table of Contents
Advertisement
Settings
Parameters
96.53...96.59
User lock
For better cybersecurity, ABB highly recommends that you set a master pass code to
prevent, for example, the changing of parameter values and/or the loading of
firmware and other files.
WARNING! ABB will not be liable for damages or losses caused by the failure
to activate the user lock using a new pass code. See
(page 18).
To activate the user lock for the first time,
1. Type the default pass code, 10000000, into
parameters
96.100...96.102
2. Type a new pass code into
digits; if using Drive composer, finish by pressing Enter.
3. Confirm the new pass code in
WARNING! Store the pass code in a safe place – the user lock cannot be
opened even by ABB if the pass code is lost.
4. In
96.102 User lock
recommend you select all the actions unless otherwise required by the
application).
5. Type an invalid (random) pass code into
6. Activate
96.08 Control board
7. Check that parameters
random pass code into 96.02.
To reopen the lock, type your pass code into
parameters
96.100...96.102
Settings
Parameters
96.02
(page 488).
visible.
96.100 Change user pass
96.101 Confirm user pass
functionality, define the actions that you want to prevent (we
boot, or cycle the power to the control unit.
96.100...96.102
visible.
(page 482) and
96.100...96.102
Standard program features 131
Cybersecurity disclaimer
96.02 Pass
code. This will make
code. Always use eight
code.
96.02 Pass
code.
are hidden. If they are not, type another
96.02 Pass
code. This will again make
(page 490).
- Quick Links:
- Modbus Holding Register Addresses
Hide quick links:
Advertisement
Chapters
Table of Contents
