Table of Contents
Advertisement
Parameter
Energy increase per pulse
Output time for pulse operating
mode
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
Behavior when Activating the Set of Parameters after the Set of Parameters was Changed
Persistent: The binary output is set to the new status (ON or OFF) as defined by the current indication.
Pulse: If the binary output is ON in pulse mode while activating the parameter set, the binary output is imme-
diately switched to OFF after the parameter set has been activated. This happens even if the parameterized
Output time for pulse operating mode has not yet elapsed.
Value View of the Binary Outputs
To display the values of the binary outputs in the Value view tab, proceed as follows:
•
In the navigation window, click Binary inputs and outputs.
[sc_q100_BO_evaluation, 2, en_US]
Figure 4-9
Depending on the parameterized source type, the indications routed to the binary outputs and energy coun-
ters are evaluated.
Configuration and Evaluation via Display
4.3.3
Submenu Binary Outputs
[dw_submenu_binary_inputs_outputs, 1, en_US]
Figure 4-10
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Default Setting
1.00 Wh
20 * 10 ms = 200 ms
Value View Tab, Binary Status (Binary Outputs)
Configuration and Evaluation Binary Outputs
Setting Range
0.10 Wh/VAh/varh to
1 000 000.00 Wh/VAh/varh
50 ms to 3 600 000 ms
Process Connections
4.3 Binary Outputs
129
Advertisement
Table of Contents
Troubleshooting
