Table of Contents
Advertisement
[sc_q100__Modbus_TCP_settings, 2, en_US]
Figure 2-18
•
Configure the respective parameters according to the following table.
Table 2-9
Parameter
Standard port number
Access rights
User-defined port 1
12
Port number
Access rights
12
User-defined port 2
14
Port number
Access rights
14
Keep alive time
Communication supervision
time
This parameter is available only if User-defined port 1 is set to yes.
12
This parameter is available only if you have activated the Wind Farm mode.
13
14
This parameter is available only if User-defined port 2 is set to yes.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Configuration Tab, Modbus TCP Settings
Settings for Modbus TCP
Default Setting
502
Full
No
503
Read only
No
13
504
Read only
10 s
600 (* 100 ms)
2.5 Ethernet Communication
Setting Range
502
Not settable
Full
Read only
No
Yes
503 to 65 535
Full
Read only
No
Yes
503 to 65 535
Full
Read only
0 s = switch off
1 s to 65 535 s
0 s = none
100 ms to 6 553 400 ms
Basic Functions
49
Advertisement
Table of Contents
Troubleshooting
