Policy-Map - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
policy-map
Use the policy-map global configuration command to create or to modify a policy map that can be
attached to multiple physical ports and to enter policy-map configuration mode. Use the no form of this
command to delete an existing policy map.
Syntax Description
policy-map-name
Defaults
No policy maps are defined. By default, packets are sent unmodified.
Command Modes
Global configuration
Command History
Release
12.2(25)EX
Usage Guidelines
The switch supports a maximum of 256 unique policy maps.
Before configuring policies for classes whose match criteria are defined in a class map, use the
policy-map command to specify the name of the policy map to be created or modified. Entering the
policy-map command also enables the policy-map configuration mode, in which you can configure or
modify the class policies for that policy map.
After entering the policy-map command, you enter policy-map configuration mode, and these
configuration commands are available:
•
•
•
•
Note
If you enter the no policy-map configuration command or the no policy-map policy-map-name global
configuration command to delete a policy map that is attached to an interface, a warning message
appears that lists any interfaces from which the policy map is being detached. The policy map is then
detached and deleted. For example:
Warning: Detaching Policy test1 from Interface GigabitEthernet0/1
OL-9640-07
policy-map policy-map-name
no policy-map policy-map-name
Name of the policy map.
Modification
This command was introduced.
class: the specified traffic classification for which the policy actions are applied. The classification
is defined in the class-map global configuration command. For more information, see the
command.
description: describes the policy map (up to 200 characters).
exit: exits policy-map configuration mode and returns to global configuration mode.
no: removes a previously defined policy map.
Cisco ME 3400 Ethernet Access Switch Command Reference
policy-map
class-map
2-287
Hide quick links:
Advertisement
Table of Contents
