Mac Address-Table Learning Vlan - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
mac address-table learning vlan
mac address-table learning vlan
Use the mac address-table learning global configuration command to enable MAC address learning on
a VLAN. This is the default state. Use the no form of this command to disable MAC address learning
on a VLAN to control which VLANs can learn MAC addresses.
This command is supported only when the switch is running the metro IP access or metro access image.
Syntax Description
vlan-id
Defaults
By default, MAC address learning is enabled on all VLANs.
Command Modes
Global configuration
Command History
Release
12.2(25)EX
Usage Guidelines
Customers in a service provider network can tunnel a large number of MAC addresses through the
network and fill the available MAC address table space. When you control MAC address learning on a
VLAN, you can manage the available MAC address table space by controlling which VLANs, and
therefore which ports, can learn MAC addresses.
You can disable MAC address learning on a single VLAN (for example, no mac address-table learning
vlan 223) or on a range of VLANs (for example, mac address-table learning vlan 1-10, 15).
Before you disable MAC address learning, be sure that you are familiar with the network topology and
the switch system configuration. Disabling MAC address learning on a VLAN could cause flooding in
the network. For example, if you disable MAC address learning on a VLAN with a configured switch
virtual interface (SVI), the switch floods all IP packets in the Layer 2 domain. If you disable MAC
address learning on a VLAN that includes more than two ports, every packet entering the switch is
flooded in that VLAN domain. We recommend that you disable MAC address learning only in VLANs
that contain two ports and that you use caution before disabling MAC address learning on a VLAN with
an SVI.
You cannot disable MAC address learning on a VLAN that the switch uses internally. If the VLAN ID
that you enter in the no mac address-table learning vlan vlan-id command is an internal VLAN, the
switch generates an error message and rejects the command. To view used internal VLANs, enter the
show vlan internal usage privileged EXEC command.
If you disable MAC address learning on a VLAN configured as a private VLAN primary or a secondary
VLAN, the MAC addresses are still learned on the other VLAN (primary or secondary) that belongs to
the private VLAN.
Cisco ME 3400 Ethernet Access Switch Command Reference
2-216
mac address-table learning vlan vlan-id
no mac address-table learning vlan vlan-id
Specify a single VLAN ID or a range of VLAN IDs separated by a hyphen or
comma. Valid VLAN IDs are 1 to 4094. It cannot be an internal VLAN.
Modification
This command was introduced.
Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
