Show Mvr Interface - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show mvr interface
show mvr interface
Use the show mvr interface privileged EXEC command without keywords to display the Multicast
VLAN Registration (MVR) receiver and source ports. Use the command with keywords to display MVR
parameters for a specific receiver port.
Syntax Description
interface-id
members
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
12.2(35)SE
Usage Guidelines
If the entered port identification is a non-MVR port or a source port, the command returns an error
message. For receiver ports, it displays the port type, per port status, and Immediate-Leave setting.
If you enter the show mvr interface interface-id command and the specified port is a non-MVR port,
the output displays NON MVR in the Type field. For active MVR ports, it displays the port type
(RECEIVER or SOURCE), mode (access or trunk), VLAN, status, and Immediate-Leave setting.
If you enter the members keyword, all MVR group members on the interface appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco ME 3400 Ethernet Access Switch Command Reference
2-486
show mvr interface [interface-id [members [vlan vlan-id]]] [ | {begin | exclude | include}
expression]
(Optional) Display MVR type, status, and Immediate Leave setting for the
interface.
Valid interfaces include physical ports (including type, module, and port
number.
(Optional) Display all MVR groups to which the specified interface belongs.
(Optional) Display all MVR group members on this VLAN. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The Mode and VLAN fields were added to the output display.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
