Cisco ME 3400 Command Reference Manual page 292

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

permit (ARP access-list configuration)

Command History

Usage Guidelines

You can add permit clauses to forward ARP packets based on some matching criteria.

This example shows how to define an ARP access list and to permit both ARP requests and ARP

responses from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:

Switch(config)# arp access-list static-hosts

Switch(config-arp-nacl)# permit ip host 1.1.1.1 mac host 0000.0000.abcd

Switch(config-arp-nacl)# end

You can verify your settings by entering the show arp access-list privileged EXEC command.

Related Commands

arp access-list

deny (ARP access-list

configuration)

ip arp inspection filter vlan

show arp access-list

Cisco ME 3400 Ethernet Access Switch Command Reference

Modification

This command was introduced.

The command was supported in the metro base image.

Defines an ARP access control list (ACL).

Denies an ARP packet based on matches against the DHCP bindings.

Permits ARP requests and responses from a host configured with a

static IP address.

Displays detailed information about ARP access lists.

Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Show Quick Links

Table of Contents