Debug Ethernet Service - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Appendix B
Cisco ME 3400 Ethernet Access Switch Debug Commands
debug ethernet service
Use the debug ethernet service privileged EXEC command to enable debugging of Ethernet customer
service instances. Use the no form of this command to disable debugging.
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
all
api
error
evc
id evc-id
instance
id id interface-id
interface
interface-id
interface
[interface-id]
oam-mgr
Command Default
Ethernet service debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEG
Usage Guidelines
The undebug ethernet service command is the same as the no debug ethernet service command.
OL-9640-07
debug ethernet service {all | api | error | evc [id evc-id] | instance [id id interface-id | interface
interface-id] | interface [interface-id] | oam-mgr}
no debug ethernet service {all | api | error | evc [id evc-id] | instance [id id interface-id | interface
interface-id] | interface [interface-id] | oam-mgr}
Display all Ethernet customer-service debug messages.
Display debug messages about the interaction between the Ethernet
infrastructure and its clients.
Display Ethernet customer-service error messages occurring in the Ethernet
infrastructure subsystem.
Display Ethernet virtual connection (EVC) debug messages
(Optional) Display EVC debug messages relevant to a specific EVC identifier.
The EVC identifier can be a string of from 1 to 100 characters.
Display debug messages related to Ethernet customer-service instances.
(Optional) Display Ethernet service-instance debug messages for a specific
Ethernet service instance ID and interface. The service identifier range is 1 to
4294967295. The interface is a physical interface.
(Optional) When entered after the instance keyword, display service-instance
debug messages for the interface. You must enter an interface ID.
Display debugging for Ethernet services on all interfaces or the specified
interface.
Display debug messages for the Ethernet operation, administration, and
maintenance (OAM) manager component of the infrastructure.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug ethernet service
B-5
Hide quick links:
Advertisement
Table of Contents
