Cisco ME 3400 Command Reference Manual page 477
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples
This is an example of output from the show lacp counters user EXEC command.
the fields in the display.
Switch> show lacp counters
Port
---------------------------------------------------------------------
Channel group:1
Gi0/1
Gi0/2
Table 2-16
show lacp counters Field Descriptions
Field
LACPDUs Sent and Recv
Marker Sent and Recv
Marker Response Sent and Recv
LACPDUs Pkts and Err
This is an example of output from the show lacp internal command:
Switch> show lacp 1 internal
Flags:
Channel group 1
Port
Gi0/1
Gi0/2
Table 2-17
Table 2-17
show lacp internal Field Descriptions
Field
State
LACP Port Priority
OL-9640-07
LACPDUs
Sent
Recv
Sent
19
10
0
14
6
0
Description
The number of LACP packets sent and received by a port.
The number of LACP marker packets sent and received by a port.
The number of LACP marker response packets sent and received by a port.
The number of unknown and illegal packets received by LACP for a port.
S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode
LACP port
Flags
State
Priority
SA
bndl
32768
SA
bndl
32768
describes the fields in the display.
Description
State of the specific port. These are the allowed values:
– —Port is in an unknown state.
•
bndl—Port is attached to an aggregator and bundled with other ports.
•
susp—Port is in a suspended state; it is not attached to any aggregator.
•
hot-sby—Port is in a hot-standby state.
•
indiv—Port is incapable of bundling with any other port.
•
indep—Port is in an independent state (not bundled but able to switch data traffic.
•
In this case, LACP is not running on the partner port).
down—Port is down.
•
Port priority setting. LACP uses the port priority to put ports s in standby mode when
there is a hardware limitation that prevents all compatible ports from aggregating.
Marker
Marker Response
Recv
Sent
Recv
0
0
0
0
0
0
P - Device is in Passive mode
Admin
Key
0x3
0x3
Cisco ME 3400 Ethernet Access Switch Command Reference
Table 2-16
LACPDUs
Pkts Err
0
0
Oper
Port
Port
Key
Number
State
0x3
0x4
0x3D
0x3
0x5
0x3D
show lacp
describes
2-451
Hide quick links:
Advertisement
Table of Contents
