Cisco ME 3400 Command Reference Manual page 388
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show controllers ethernet-controller
Examples
This is an example of output from the show controllers ethernet-controller command for an interface.
Table 2-8
Switch# show controllers ethernet-controller gigabitethernet0/1
Transmit GigabitEthernet0/1
Table 2-8
Transmit Field Descriptions
Field
Description
Bytes
The total number of bytes sent on an interface.
Unicast Frames
The total number of frames sent to unicast addresses.
Multicast frames
The total number of frames sent to multicast addresses.
Broadcast frames
The total number of frames sent to broadcast addresses.
Too old frames
The number of frames dropped on the egress port because the packet aged out.
Deferred frames
The number of frames that are not sent after the time exceeds 2*maximum-packet time.
MTU exceeded frames The number of frames that are larger than the maximum allowed frame size.
1 collision frames
The number of frames that are successfully sent on an interface after one collision occurs.
2 collision frames
The number of frames that are successfully sent on an interface after two collisions occur.
3 collision frames
The number of frames that are successfully sent on an interface after three collisions occur.
4 collision frames
The number of frames that are successfully sent on an interface after four collisions occur.
Cisco ME 3400 Ethernet Access Switch Command Reference
2-362
describes the Transmit fields, and
0 Bytes
0 Unicast frames
0 Multicast frames
0 Broadcast frames
0 Too old frames
0 Deferred frames
0 MTU exceeded frames
0 1 collision frames
0 2 collision frames
0 3 collision frames
0 4 collision frames
0 5 collision frames
0 6 collision frames
0 7 collision frames
0 8 collision frames
0 9 collision frames
0 10 collision frames
0 11 collision frames
0 12 collision frames
0 13 collision frames
0 14 collision frames
0 15 collision frames
0 Excessive collisions
0 Late collisions
0 VLAN discard frames
0 Excess defer frames
0 64 byte frames
0 127 byte frames
0 255 byte frames
0 511 byte frames
0 1023 byte frames
0 1518 byte frames
0 Too large frames
0 Good (1 coll) frames
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Table 2-9
describes the Receive fields.
Receive
0 Bytes
0 Unicast frames
0 Multicast frames
0 Broadcast frames
0 Unicast bytes
0 Multicast bytes
0 Broadcast bytes
0 Alignment errors
0 FCS errors
0 Oversize frames
0 Undersize frames
0 Collision fragments
0 Minimum size frames
0 65 to 127 byte frames
0 128 to 255 byte frames
0 256 to 511 byte frames
0 512 to 1023 byte frames
0 1024 to 1518 byte frames
0 Overrun frames
0 Pause frames
0 Symbol error frames
0 Invalid frames, too large
0 Valid frames, too large
0 Invalid frames, too small
0 Valid frames, too small
0 Too old frames
0 Valid oversize frames
0 System FCS error frames
0 RxPortFifoFull drop frame
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
