Show Inventory - Cisco ME 3400 Command Reference Manual
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show inventory
show inventory
Use the show inventory user EXEC command to display product identification (PID) information for
the hardware.
Syntax Description
entity-name
raw
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.2(25)EX
12.2(25)SEG1
Usage Guidelines
The command is case sensitive. With no arguments, the show inventory command produces a compact
display of all identifiable entities that have a product identifier. The display shows the entity location
(slot identity), entity description, and the unique device identifier (UDI), including PID, version
identifier (VID), and serial number (SN) of that entity.
Many legacy SFPs are not programmed with PIDs and VID.s
If there is no PID, no output appears when you enter the show inventory command.
Note
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is example output from the show inventory command:
Switch> show inventory
NAME: "1", DESCR: "model-id"
PID: model-id , VID:Vo1 , SN: FSJC0407839
NAME: "GigabitEthernet0/1", DESCR: "100BaseBX-10U SFP"
PID:
NAME: "GigabitEthernet0/2", DESCR: "10/100/1000BaseTX SFP"
PID:
Cisco ME 3400 Ethernet Access Switch Command Reference
2-414
show inventory [entity-name | raw] [ | {begin | exclude | include} expression]
(Optional) Display the specified entity. For example, enter the interface
(such as gigabitethernet 0/x) into which a small form-factor pluggable (SFP)
module is installed to display its identity.
(Optional) Display every entity in the device.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Support for the entity-name keyword was added.
, VID:
, VID:
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
, SN: NEC08440067
, SN: 00000MTC0839048G
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
