Show Ip Igmp Snooping Mrouter - Cisco ME 3400 Command Reference Manual

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

show ip igmp snooping mrouter

Use the show ip igmp snooping mrouter privileged EXEC command to display the Internet Group

Management Protocol (IGMP) snooping dynamically learned and manually configured multicast router

ports for the switch or for the specified multicast VLAN.

Syntax Description

vlan vlan-id

Command Modes

Privileged EXEC

Command History

Usage Guidelines

Use this command to display multicast router ports on the switch or for a specific VLAN.

VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP

When multicast VLAN registration (MVR) is enabled, the show ip igmp snooping mrouter command

displays MVR multicast router information and IGMP snooping information.

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

do not appear, but the lines that contain Output appear.

This is an example of output from the show ip igmp snooping mrouter command. It shows how to

display multicast router ports on the switch.

Switch# show ip igmp snooping mrouter

Cisco ME 3400 Ethernet Access Switch Command Reference

show ip igmp snooping mrouter [vlan vlan-id] [ | {begin | exclude | include} expression]

(Optional) Specify a VLAN; the range is 1 to 1001 and 1006 to 4094.

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

Gi0/1(dynamic)

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

Show Quick Links

Table of Contents