Cisco ME 3400 Command Reference Manual page 464
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
show ip verify source
•
•
This is an example of output on an interface on which IP source guard is disabled:
Switch> show ip verify source gigabitethernet0/6
IP source guard is not configured on the interface gi0/6.
Related Commands
Command
ip verify source
Cisco ME 3400 Ethernet Access Switch Command Reference
2-438
On the Fast Ethernet 0/4 interface, IP source guard with source IP and MAC address filtering is
enabled, and static IP source bindings are configured on VLANs 10 and 11. For VLANs 12 to 20,
the default port ACL is applied on the interface for the VLANs on which IP source guard is not
configured.
On the Fast Ethernet 0/5 interface, IP source guard with source IP and MAC address filtering is
enabled and configured with a static IP binding, but port security is disabled. The switch cannot
filter source MAC addresses.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Enables IP source guard on an interface.
OL-9640-07
Hide quick links:
Advertisement
Table of Contents
