Cisco ME 3400 Command Reference Manual page 527
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Software configuration manual (1138 pages) ,
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Table 2-18
grouped according to the relevant QoS feature.
Table 2-18
Field
Fields associated with classes or service policies
Service-policy
input/output
Class-map
packets
Match
Fields associated with policing
police
conform-action
conform
exceed-action
exceed
Fields associated with queuing
Queue Limit
Output Queue
Tail packets dropped
Fields associated with traffic scheduling
Traffic shaping
Bandwidth
Priority
Related Commands
Command
policy-map
OL-9640-07
describes the fields in the show policy-map interface display. The fields in the table are
show policy-map interface Field Descriptions
Description
Name of the input or output service policy applied to the specified interface.
Class of traffic shown. Output appears for each configured class in the
policy. The choice for implementing class matches (match-all or match-any)
might also appear next to the traffic class.
Number of packets identified as belonging to the traffic class.
Match criteria specified for the class of traffic. This includes criteria such
as class of service (CoS) value, IP precedence value, Differentiated Services
Code Point (DSCP) value, access groups, and QoS groups.
Shown when the police command has been configured to enable traffic
policing. Displays the specified committed information rate (CIR) and
conform burst size (BC) used for policing packets.
Displays the action to be taken on packets marked as conforming to a
specified rate.
Displays the number of packets marked as conforming to the specified rate.
Displays the actions to be taken on packets marked as exceeding a specified
rate.
Displays the number of packets marked as exceeding the specified rate.
Queue size configured for the class in number of packets.
The queue created for this class of traffic.
The number of packets dropped when the mean queue depth is greater than
the maximum threshold value.
The rate used for shaping traffic.
Bandwidth configured for this class in kbps or a percentage.
Indicates that this class is configured for priority queuing.
Description
Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
Cisco ME 3400 Ethernet Access Switch Command Reference
show policy-map
2-501
Hide quick links:
Advertisement
Table of Contents
